Details about Electromagnetic Valve

Categories: Electromagnetic Valve
Brand:RICH
Comments:Electromagnetic valve is suitable for areas with explosive gas (firedamp mixture) atmosphere.


Detailed Info:

Electromagnetic valve is suitable for areas with explosive gas (firedamp mixture) atmosphere, such as coal mines. It consists of electromagnetic head and two-position-five-way valve body.


The ticket reference number for your question Technical performance:
Ambient temperature: -20oC~40oC
Relative humidity: 95%
Atmosphere pressure: 86kpa~106kpa
Coal mines with explosive gases (firedamp) and coal dust, and areas without obvious impact and vibration.

Model number	DF10-0.6
Type	Mining encapsulation
Ex-marking	Exml
Rated voltage	24VDC
Frequency	50HZ
Rated power	3W
Working pressure	0.15MPA~0.6MPA
Valve diameter	F10mm
Outline dimensions	115mm×35mm×22mm(L×W×H)
Weight	245g

KeyWords:

Electromagnetic Valve ,Solenoid Valve ,Electromagnetic Valves ,Pneumatic Valves ,Pipeline Pneumatic Valve ,Pipeline Pneumatic Regulating Valve

Carbon Molecular Sieve

Categories: Carbon Molecular Sieve
Brand:RICH
Detailed Product Description:A carbon molecular sieve belongs to carbon sorbent.


Features:
1) A carbon molecular sieve belongs to carbon sorbent. It is a carbon material with many hollow holes in its structure. Its hole-structure is irregular. CMS is one kind of non-metering compound and its main performance is based on the micro-hole structure
2) The air separation capacity of CMS relies on the different speeds of diffusion of gas passing CMS micro-hole and/or different adsorbabilities
3) Under balanced condition, the adsorption amount of CMS to oxygen and nitrogen is very close, while the speed of oxygen molecule passing through the micro-hole structure is much faster than the speed of nitrogen molecule
4) This principle is the base of CMS nitrogen generation. At the moment far before the balanced condition occurs, using PSA process flow, nitrogen is separated out from air .


Technical parameters:
1) When adsorption pressure is 0.6MPa, the nitrogen purity is 99.9,99.5 and 99.0 percent, their nitrogen flow are respectively 120, 180, 220 N cubic meters per hour and nitrogen air proportion is 30, 41 , 45 percent
2) When adsorption pressure is 0.7MPa, the nitrogen purity is 99.9,99.5 and 99.0 percent, their nitrogen flow are respectively 125, 205, 245 N cubic meters per hour and nitrogen air proportion is 30, 41 , 45 percent
3) When adsorption pressure is 0.8MPa, the nitrogen purity is 99.9,99.5 and 99.0 percent, their nitrogen flow are respectively 130, 220, 275 N cubic meters per hour and nitrogen air proportion is 31, 42 , 46 percent
4) Grain diameter: 1.5 mm
5) Adsorption period: 2 x 60s
6) Pile proportion: 630~650g/l
7) Compressive strength: not less than 100N/grain

KeyWords:

Molecular Carbon Sieves ,Carbon Molecular Sieve ,Molecular Sieve ,Molecular Carbon ,Molecular Sieve Unit ,Carbon Molecular Nitrogen

RS Series Screw Air Compressor

Categories: Screw Air Compressor
Brand:RICH
Model:RS15H-RS45
Power supply: 380V/3/50Hz Starting way: star-delta pressure drop.

Detailed Info:

Remark: Power supply: 380V/3/50Hz Starting way: star-delta pressure drop. Volume flow is the tested volume flow under the condition of 20℃ ambient temperature and rated working pressure in accordance with the requirements of Gb3853（eqvISO1217）. Oil content of discharged gas: ≤3ppm Temperature of discharged gas: AMT +5～8℃.

Model	Volume Flow(m3/min)	Discharge Pressure(Mpa)	Power(Kw)	Noise[dB(A)]	Outlet Dimension	Weight(Kg)	External Dimension(L×W×H mm)
RS15H-7	2.61	0.7	15	67	RP1	610	1300×800×1400
RS15H-8	2.45	0.8
RS15H-10	2.2	1
RS15H-13	1.7	1.3
RS18.5-7	3.1	0.7	18.5	68	RP1	630	1300×800×1400
RS18.5-8	2.96	0.8
RS18.5-10	2.7	1
RS18.5-13	2.2	1.3
RS22-7	3.8	0.7	22	68	RP1	630	1300×800×1400
RS22-8	3.62	0.8
RS22-10	3.2	1
RS22-13	2.83	1.3
RS30-7	4.6	0.7	30	69	RP1 1/4	810	1560×950×1480
RS30-8	4.5	0.8
RS30-10	4	1
RS30-13	3.2	1.3
RS30H-7	5.43	0.7	30	69	RP1 1/4	810	1560×950×1480
RS30H-8	5.21	0.8
RS30H-10	4.6	1
RS30H-13	3.9	1.3
RS37-7	6.62	0.7	37	70	RP1 1/4	860	1560×950×1480
RS37-8	6.4	0.8
RS37-10	5.8	1
RS37-13	4.8	1.3
RS45-7	7.3	0.7	45	73	RP1 1/4	890	1560×950×1480
RS45-8	7	0.8
RS45-10	6.2	1
RS45-13	5.2	1.3

We are a professional Screw Air Compressor manufacturer and supplier in China. Here you can find high-quality products in a competitive price. Also we supply OEM service of products for you.

KeyWords:

Screw Air Compressor ,Industrial Air Compressors ,Rotary Screw Compressor ,High Pressure Air Compressor ,Rotary Screw Air Compressor ,Mini Air Compressor

Air Separation Plant

Categories: Air Separation Plant
Brand:RICH
Model:VPSA
Color:white

Detailed Product Description

The features of the plant as follows:

1.It adopts double bed molecular sieve purifier,shorten activation time and prolong the life of molecular sieve.

2.It adopts booster expansion turbine with gas bearing.3.High efficiency rectification column which makes the extraction efficiency of nitrogen rank first inland.

4.It adopts Siemens PLC control system and is controlled in the central control room.

5.Cold box is designed in fission structure , which is sent to site after assemble completey in order to reduce workload in site.

gaseous oxygen:2000m3/h

gaseous nitrogen:4000m3/h

refined liquid argon:70m3/h 

product purity:oxygen 99.6%,nitrogen 99.9%

The plant adopts the technics of gas bearing and booster expansion,and reasonable process combination,which improve the extraction efficiency and lower power consumption.It has the feature of low power consumption,stable operation and convenient maintenance and so on.It is used widely in mechanism,metallurgy,petro-chemical and chemical fibre industry and so on.

KeyWords:

Air Separation Machine ,Liquid Air Separation Plant ,Cryogenic Air Separation ,Air Separation Plant ,Air Compressor Separator ,Compact Cryogenic Air Separation Plants

VPSA Oxygen Equipment

Categories: VPSA Oxygen Generators
Brand:RICH
Comments:Capacity:200-5000Nm3/h
         Purity: 85%-95%
         Energy consumption of equipment: 0.35-0.52Kw/Nm3O2

Detailed Info:


1.1 Air Fan and Vacuum Pump
Air fan provide air source for the whole system. Based on VPSA oxygen generator design condition and customer requirements, fan with proper outlet air pressure is to be provided. Vacuum pump ensures correct system operation and keeps the system in ideal vacuum state, which ensures equipment constantly adsorb nitrogen and produce oxygen.

1.2 Temperature Regulating System
Air temperature regulating system is made up of a water cooler and an electric heater. The temperature of air compressed by fan is around 65oC-70oC, passing the water cooler, its temperature is reduced to meet the requirements of process operation. Then it is sent into the adsorption towers. In winter, the temperature of air is to be increased by the electric heater and reaches the requirements of process operation.

1.3 Adsorption System
The adsorption system mainly consists of two towers filled with zeolite molecular sieve adsorbents and piping valves etc. Air enters into the bottom of one tower, when passing through the adsorbent layer,N2, Coxygen, Vapor are adsorbed by molecular sieve and oxygen passes through the adsorbents and gathers at the top of tower, flowing out as produced gas, meanwhile the other tower is in the process of regeneration. When the adsorbing tower almost reaches saturation, by the operation of control system, the processing air flows into the regenerated tower and begins to produce oxygen.Two towers alternately adsorb and constantly produce oxygen .



1.4 Oxygen Buffer Tank
Compared with three-tower process, oxygen generator with two towers can not produce consecutive oxygen, therefore, a buffer tank with large volume is needed for stable oxygen output.

KeyWords:

VPSA Oxygen Equipment ,Oxygen Generation Plants ,China Oxygen Generator ,VPSA Oxygen Generator ,VPSA Oxygen Generators ,PSA Oxygen Generators

Medical Oxygen Generator

Categories: PSA Oxygen Generators
Brand:RICH
Model:PSA


Detailed Product Description

Applications:

1. After the N2 and O2 Separation Device, there is a O2 after-cleaning, testing and controlling cabine t consisting of O2 cleaning device?temperature testing device and control system. Removing dust, eliminating bacteria and stabilizing pressure to ensure the oxygen outputted stably and meeting medical standards.

2. Users only need to turn the start/stop button to gain the oxygen with designing required flow capacity and purity within 30 minutes.

3. Single line and double lines types are available for option. Users are suggested to choose the single line type when they only require a stable flow capacity; choose double lines when demand is unstable and sometimes meet extra peak values.


Principles:

PSA oxygen generator uses zeolite molecular sieve as sorbent, produces oxygen by making use of the PSA principle. Under certain pressure, zeolite molecular sieve has different oxygen/nitrogen adsorption capacity, i.e. much more nitrogen adsorption capacity than oxygen adsorption capacity. PLC controls pneumatic valve on/off to realize two towers alternate adsorption and desorption as per pressure change, carries out oxygen/nitrogen separation and produces oxygen with desired purity.

We provide superior oxygen products that are economical, safe, improve the environment and satisfy the needs of healthcare patie.

KeyWords:

PSA Oxygen Generators ,Oxygen Generators ,Medical Oxygen Generator ,Personal Oxygen Generator ,Nitrogen Gas Generator ,Portable Oxygen Concentrator Generator

Nitrogen Purifier Plant

Categories: Nitrogen Purifier
Brand:RICH
Model:NHCA
Comments:These nitrogen purification equipment are used together with PSA nitrogen generator.

Detailed Info:

These nitrogen purification equipment are used together with PSA nitrogen generator to provide site nitrogen with high purity.


NCHa nitrogen purifying equipment
Technical index of the output nitrogen:
Capacity: 10~1000 Nm3/h
Oxygen content: ≤5ppm
Hydrogen content: ≤1000ppm
Dust content: ≤1 mg/m3
JNCH nitrogen purifying equipment
Technical index of the output nitrogen:
Capacity: 10~1000 Nm3/h
Oxygen content: ≤5ppm
Hydrogen content: ≤5ppm
Dust content: ≤1 mg/m3
NCHC nitrogen purifying equipment
Technical index of the output nitrogen:
Capacity: 10~1000 Nm3/h
Oxygen content: ≤5ppm
Hydrogen content: zero
Dust content: ≤1 mg/m3
NCRs/d nitrogen purifying equipment
Technical index of the output nitrogen:
Capacity: 10~1000 Nm3/h
Oxygen content: ≤5ppm
Hydrogen content: zero
Dust content: ≤1 mg/m3

KeyWords:

Nitrogen Purifier ,Nitrogen Purifiers ,N2 Generator Purifier ,Oxygen Purifier ,PSA Nitrogen Purifier ,Nitrogen Gas Purifier

Nitrogen Generator For Industrial Use

Categories: PSA Nitrogen Generator
Brand:RICH
Model:BGPN
Comments:PSA nitrogen generator uses carbon molecular sieve as sorbent, produces nitrogen by making use of the PSA principle.

Principles: 

Model No	BGPN
Flow	1-2000Nm3/h
Purity	97-99.9995%
Pressure	0.05-1.0Mpa
DewPoint	-20℃~-46℃
Remarks	Normal

1. Metallurgy: For anneal protection, agglomeration protection, nitriding, furnace washing and blowing ,etc. Used in fields such as metal heating treatment, powder metallurgy, magnetic material, copper process, metallic mesh, galvanized wire, semiconductor, etc.

2. Chemical and new material industries: For chemical material gas, pipeline blowing, gas replacement, gas protection, product transport, etc. Used in fields such as chemical ,urethane elastic fiber, rubber, plastic, tyre, polyurethane, biological technology, intermediate, etc.

3. Electronic industry: For encapsulation, agglomeration, anneal, deoxidization, storage of electronic products. Used in fields such as peak welding, circumfluence welding, crystal, piezoelectricity, electronic porcelain, electronic copper tape, battery, electronic alloy material, etc.

PSA nitrogen generator uses carbon molecular sieve as sorbent, produces nitrogen by making use of the PSA principle. Under certain pressure, carbon molecular sieve has different oxygen/nitrogen adsorption capacity, i.e. much more oxygen adsorption capacity than nitrogen adsorption capacity.PLC controls pneumatic valve on/off to realize two towers alternate adsorption and desorption as per pressure change, carries out oxygen/nitrogen separation and produces nitrogen with desired purity.

KeyWords:

PSA Nitrogen Generators ,Normal Industrial Nitrogen Generator